document number: 51010 for tec hnical questions, contact: sfer@vishay.com www.vishay.com revision: 08-feb-11 see al so application note: www.vishay.com/doc?51001 and www.vishay. com/doc?52029 27 multi-turn surface mount 1/4" square cermet trimmers, fully sealed ts6 vishay sfernice three variations are available according to the positioning of the control screw and contact positions. the ts6 multi-turn trimmer ha s been designed for use in pcb surface mounting applications. the cermet track gives a high stability performance with an extended ohmic capacity of 10 ? to 2 m ? . features ? 0.25 w at 70 c ? military and professional grade ? multi-turn operation ? a low contact resistance variation (down to 2 % rn) ? low end contact resistance (1 ? typical) ? full sealing ? tests according to cecc 41000 or iec 60393-1 ? compliant to rohs directive 2002/95/ec dimensions in millimeters ( 0.5 mm) ts6x recommended soldering areas ts6z ts6y b c ? 0.45 slot 0.5 x 0.5 0.25 5.8 0.10 ? 1.8 0.7 6.85 max. 6.85 max. 0.20 2.54 2.54 5 max. 1 0.10 6.7 max. 1 2.54 2.54 7.5 c b a 3 ? 1.8 1.3 0.1 7.6 max. 2.54 2.54 ? 0.45 6.85 max. 0.25 slot 0.5 x 0.5 6.85 max. 5 max. 1 0.1 8.85 max. 5.3 max. 3 b c a 9.3 2.54 2.54 1 c b 1.3 0.1 1 0.10 ? 0.45 a 6.85 max. 0.3 ? 1.8 8 max. slot 0.5 x 0.5 2.54 2.54 6.85 max. 5 max. 6.85 max. 6.7 max. 2.54 2.54 1 7.5 c b a 3
ts6 vishay sfernice multi-turn surface mount 1/4" square cermet trimmers, fully sealed www.vishay.com for technical questions, contact: sfer@vishay.com document number: 51010 28 see also application note: www.vishay.com/doc?51001 and www.vishay.com/doc?52029 revision: 08-feb-11 electrical specifications resistive element cermet electrical travel 14 turns 2 resistance range 10 ? to 2 m ? standard series e3 1 - 2.2 - 4.7 and on request 1 - 2 - 5 tolerance standard 10 % on request 5 % power rating linear 0.25 w at 70 c circuit diagram temperature coefficient see standard resistance element table limiting element voltage (linear law) 250 v contact resistance variation 2 % rn or 2 ? end resistance (typical) 1 ? dielectric strength (rms) 1000 v insulation resistance 10 6 m ? mechanical specifications mechanical travel 15 turns 5 operating torque (max. ncm) 1.5 end stop torque clutch action net wweight (max. g) 0.5 wiper (actual travel) positioned at approx. 50 % environmental specifications temperature range - 55 c to + 155 c climatic category 55/125/56 sealing fully sealed ip67 msl level 1 soldering recommendations recommended reflow profile 2, see application note www.vishay.com/doc?52029 0.25 0.125 0 0 155 ambient temperature in c rated power in w 50 70 100 a (1) b (2) c (3) cw
ts6 multi-turn surface mount 1/4" square cermet trimmers, fully sealed vishay sfernice document number: 51010 for tec hnical questions, contact: sfer@vishay.com www.vishay.com revision: 08-feb-11 see al so application note: www.vishay.com/doc?51001 and www.vishay. com/doc?52029 29 performances tests conditions requirements other typical values and drifts ? r t / r t (%) ? r 1-2 / r 1-2 (%) ? r t / r t (%) ? r 1-2 / r 1-2 (%) other electrical endurance 1000 h at rated power 90'/30' - ambient temp. 70 c 2 % 4 % contact res. variation: < 3 % rn 1 % 2 % contact res. variation: < 1 % rn climatic sequence phase a dry heat 125 c phase b damp heat phase c cold - 55 c phase d damp heat 5 cycles 2 % 3 % 0.5 % 1 % damp heat steady state 40 c 93 % rh 56 days 2 % 3 % dielectric strength: 250 v rms insulation resistance: > 100 m ? 0.5 % 1 % dielectric strength: 1000 v rms insulation resistance: > 10 4 m ? charge of temperature - 55 c to + 125 c 5 cycles 1.5 % ? v 1-2 / ? v 1-3 ? 2 % 0.5 % ? v 1-2 / ? v 1-3 < 1 % mechanical endurance 200 cycles at rated power 2 % contact res. variation: < 3 % rn (2 % + 3 ? ) contact res. variation: < 1 % rn shock 50 g at 11 ms 3 successive shocks in 3 directions 1 % ? v 1-2 / ? v 1-3 ? 2 % 0.1 % ? v 1-2 / ? v 1-3 ? 0.2 % vibration 10 hz to 55 hz 0.75 mm or 10 g for 6 h 1 % ? v 1-2 / ? v 1-3 ? 2 % 0.1 % ? v 1-2 / ? v 1-3 ? 0.2 % standard resistance element data standard resistance values linear law typical tcr - 55 c + 125 c max. power at 70 c max. working voltage max. wiper current ? wv mappm/c 10 0.25 158 158 100 22 0.25 2.34 107 47 0.25 3.43 73 100 0.25 5.00 50 220 0.25 7.42 34 470 0.25 10.8 23 1k 0.25 15.8 15.8 2.2k 0.25 23.4 10.7 4.7k 0.25 34.3 7.3 10k 0.25 50 5 22k 0.25 74.2 3.37 47k 0.25 108.4 2.31 100k 0.25 158 1.58 220k 0.25 234 1.97 470k 0.13 250 0.53 1m 0.06 250 0.25 2m 0.03 250 0.125
ts6 vishay sfernice multi-turn surface mount 1/4" square cermet trimmers, fully sealed www.vishay.com for technical questions, contact: sfer@vishay.com document number: 51010 30 see also application note: www.vishay.com/doc?51001 and www.vishay.com/doc?52029 revision: 08-feb-11 marking printed: vishay trademark, model, style, ohmic value (in ? , k ? , m ? ), tolerance (in %) only if non standard, manufacturing date, marking of terminal 3. packaging ? in tube of 50 piec es code t20 (tu50) ? in reel of 500 piec es code r10 (tr500) ordering information (part number) model style ohmic value tolerance packaging special number ts6 x y z from 10 ? to 2 m ? 474 = 470 k ? k = 10 % on request j = 5 % t20 = tube 50 pieces on request r10 = reel 500 pieces (if applicable) given by vishay for custom design description (for information only) ts6 y 470k 10 % tu e3 model style value tolerance special packaging lead finish 10 47 k 4r y ts 6
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
